2023-03-01 - Bugfix: When FIS-Control is operated on battery voltage (terminal 30), it had to be shortly unplugged to restart it after firmware update. This is now solved. - Bugfix: Gradient circle was not drawn correctly when a large radius was set. 2022-12-16 - New layout "Gradient circle" that allows to configure colored rings for all three round gauges. - For Audi A3 8V: FIS-Control can now be connected to battery voltage (terminal 30) instead of ignition (terminal 15). It will automatically shut down when CAN bus goes to sleep (current consumption is almost 0 in this case). 2022-07-03 - Added support for Audi Q7 4L 2022-05-21 - For Audi A4/A5/A6/A7/A8/Q5: FIS-Control can now be connected to battery voltage (terminal 30) instead of ignition (terminal 15). It will automatically shut down when CAN bus goes to sleep (current consumption is almost 0 in this case). 2022-04-16 - Support for the MMI 3G basic in the Audi Q5 8R 2022-04-03 - Added some new measurement values for some control units 2022-02-19 - Change: The calculation for boost pressure can be applied to multiple items in a table 2021-12-27 - Support for the MMI 3G basic in the Audi A4 B8 2021-11-17 - Bugfix: Display on Golf Mk7 could stay black when switching between FIS-Control and headunit 2021-08-09 - Bugfix: FIS-Control hangs at startup, if numeric gauges were configured with a font size of zero. (Caution: This is only recoverable by setting the FIS-Control into a special boot mode) 2021-08-02 - New option for A3 8V facelift: Hide FIS-Control for 3 seconds when Drive Select button is pressed - New option for A3 8V facelift: Hide FIS-Control for 3 seconds when an MMI button is pressed - Added some more measurement values 2021-06-26 - A measurement value can now be shown as a percentage value related to the lower warn threshold (0%) and upper warn threshold (100%). 2021-06-20 - It is now possible to use a texture tile (96 x 96 pixels) as background for the table view - The "virtual cockpit" view now also shows the indicator dot. If you do not want that, set the "Indicator pos" to 0 in the configurator 2021-06-06 - The settings menu has a new option to read the installation list from the CAN gateway. At the moment this will not work in all cars. - The option "Calculation" in the configurator allows to use engine speed [RPM] and engine torque [Nm] to calculate the engine power [kW]. 2021-04-15 - Added support for the RMC headunit in the Audi A1 8X. 2021-02-14 - The gauges views can now also show numerical gauges. 2020-11-24 - Warning thresholds can be defined. If one of the thresholds is reached, the measurement value will be highlighted in red in the virtual cockpit and the table view. 2020-10-10 - Digits for Virtual Cockpit now also usable on displays with half resolution - Improved detection of other OBD sessions 2020-08-12 - The structure of the settings file has changed, therefore this firmware will need a new settings file - It is now possible to select a different control unit for every table. This allows to define a view for the transmission control unit, e.g. to read the transmission fluid temperature - There is a new option to align the columns of the table views to fit into the virtual cockpit of the RS3 8V instrument cluster 2020-07-27 - New templates uploaded ("GTI Performance Monitor" theme for the Virtual Cockpit layout and "Back to the future" theme) 2020-07-25 - Unit conversion: kg/h to g/s and m/s2 to g 2020-07-04 - Digits for Virtual Cockpit now have transparent background - Status bar can now be hidden for gauges and/or table view 2020-06-15 - Unit conversion: PSI, Fahrenheit, AFR - Calculate boost pressure from absolute pressure and ambient pressure - Option to scroll through all tables 2020-06-13 - Autostart now with added Needle Sweep option - Option to ignore PDC and rearview camera 2020-06-08 - Added a "Virtual Cockpit" layout, that shows digits in the gauges. 2020-06-07 - Changed function assignment when FIS-Control is operated with the cruise control stalk 2020-06-06 - Settings menu now also usable on low-res monitors - Selection of different tables by double clicking in the table view and then scrolling with the roller 2020-05-09 - Settings menu should be now available in all cars with an long press (about 5 seconds) to the MODE, MENU, VIEW or OK button. 2020-04-19 - Added many new measurement values 2020-03-01 - The FIS-Control now offers five tables to define measurement values. The first table is always assigned to the gauge view. But for the second screen you can assign any of the tables. You can change that assignment also in the option view of the FIS-Control. The option view can be opened with a really long press to the MODE button (this will not work in all cars yet, I will change that soon). 2020-01-09 - With the new FIS-Control app you can read the ASAM version of your ECU. - Little change in the handling of the button presses: If you disable the FIS-Control with a long press to the MODE button, the FIS-Control will only show up again with the MODE button, but not with the roller or up/down buttons. 2019-12-21 - Notifications adapted for displays with low resolution - FIS-Control MIB now supports also the Audi A6 4G pre-facelift and is now recommended for this car. 2019-12-09 - Support for VW Golf Mk7 2019-12-05 - From this firmware onwards, there is a MUCH faster upload mode for new firmware files, background images, needle graphics and settings. To use it, you will also need the new Android app which offers the new menu item "MMI: fast upload". 2019-11-21 This is a major update. I changed the way how the measurement values are configured. Therefore you have to generate a new configuration file to use the new firmware. If you want to view or modify your old configuration, you can find the old configurator page here: https://fis-control.de/mmi_v1.html Changes: - Added hundreds of new measurement values - Fixed a problem that caused some flickering on the screen on some MMI displays 2019-10-09 - Support for VW Passat B8 2019-07-17 - There is a new notification app for Android that forwards WhatsApp and eMail notifications to the FIS-Control - FIS-Control supports some common Emoji in the notification view: https://www.youtube.com/watch?v=wOGL6jWyuDA 2019-07-08 - Support for ECUMaster EGT to CAN box 2019-06-01 - Colors for background and font of the measurement table view can now be configured. - FIS-Control detects other OBD sessions and disables itself, to avoid conflicts. - Support for new FIS-Control MIB hardware (for use in the A6 4G facelift and A3 8V). 2019-01-28 - For Audi RSQ3: Option to automatically reselect the Dynamic mode of the Drive Select. This reenables the exhaust flap directly after ignition. 2019-01-17 - For Audi Q3: MMI screen now switches to rear view camera correctly. - Time in status bar is now shown without leading zeros. - Overheating protection: FIS-Control MMI turns off if CPU temperature reaches 85 C. (If this really happens, try to find a cooler location for the FIS-Control unit.)